Arjun Novo 605 CRDI (DI PP) full specifications

Arjun Novo 605 CRDI (DI PP) tractor has 4 cylinder liquid cooled engine which is compatible with TREM IV emission norms. In this tractor inline pump is removed by the company and Common Rail direct Injection system is used by the company in which a single high pressure pump is introduced which creates high pressure of diesel in a common rail then this high pressure is sent to different injectors. Tractor’s engine has 3821 cc displacement and 2100 engine rated RPM which can produce about 60 hp in power mode. Arjun Novo 605 has both Single and Double clutch options with operator’s demand.

Arjun Novo tractor has 2200 kg hydraulic weight lifting capacity and 60 liter fuel tank capacity. Tractor’s maximum equivalent crankshaft Torque is 235 Nm in Power mode and Backup Torque is 21% in Power mode.

Tractor has three types of modes according to different situations:

• Power mode (tractor produces about 60 +-5% hp at 2100 engine rated RPM).
• Normal mode (tractor produces about 56.4 +-5% hp at 2100 engine rated RPM).
• Diesel saver mode (tractor produces about 52 +-5% hp at 21 engine rated RPM).

Here are full specifications of tractor:

Price: Price of Mahindra Arjun Novo 605 CRDI tractor starts from Rs 11,15,00 and goes upto Rs 11,45,000.

Engine Arjun Novo 605 CRDI tractor

The Arjun Novo 605 CRDI by Mahindra & Mahindra Ltd. is a powerful and efficient tractor designed for versatility and durability. Powered by a 4-cylinder, 4-stroke, liquid-cooled diesel engine with Common Rail Direct Injection (CRDI) technology, it delivers up to 60 hp in power mode, 56.4 hp in normal mode, and 52 hp in diesel saver mode. With a maximum torque of 235 Nm in power mode, this tractor ensures high performance and fuel efficiency. Its 3821 cc engine, coupled with a compression ratio of 18.3:1, provides superior backup torque and consistent power delivery for demanding agricultural tasks.

Transmission of Arjun Novo 605

Tractor has Standard 15F and 3R transmission option in 2 and 4 wheel drive variants and Optional 15F + 15R transmission options only in 4 wheel drive variant with Double Clutch. Apart from this tractor has two more types creeper transmissions which are mentioned below.

The Arjun Novo 605 is equipped with a robust transmission system designed to handle various agricultural tasks with ease. It features a dry double NDC clutch with a 310 mm diameter and CRPTO clutch with a 280 mm diameter, ensuring smooth and efficient power transfer. The tractor comes with multiple gearbox options, including a standard 15 forward and 3 reverse gears in both 2WD and 4WD, with additional options for 15F+15R or 20F+20R in 4WD models. Its mechanical gearbox includes partial synchro mesh gears for seamless shifting, while the clutch paddle offers 35 mm of free play, providing optimal control and ease of use.

Gear speed for 15F + 3R transmission of Arjun Novo 605

Gear speed for 15F + 15R for Arjun Novo 605

Gear speeds for 20 forwards + 4 reverse creeper transmission which is available only in 2 wheel drive. This transmission is specially designed to provide tractor very low speed for heavy implements such super seeder in wet and straw reaper in early morning and late night conditions.

20F + 4R gear speed

This is the gear speed table of 20 forwards + 20 reverse creeper transmission which is available only in 4 WD version of tractor which provides extremely slow speed in both forward and reverse direction for application of heavy implements.

20F + 20R gear speed

Brakes of Arjun Novo 605 CRDI

Steering

PTO of Arjun Novo 605 CRDI

The Arjun Novo 605 CRDI features an advanced PTO (Power Take-Off) system designed for enhanced productivity. It offers multiple PTO speed options, including 540 RPM at 1994 engine RPM and 540E at 1470 engine RPM, with a reverse PTO available as an optional feature. The PTO delivers 53.9 hp in power mode, 50 hp in normal mode, and 46 hp in diesel saver mode, providing flexibility and power for operating various implements efficiently across different tasks. This makes the Arjun Novo 605 CRDI a versatile and powerful choice for modern farming needs.

Hydraulics of Arjun Novo 605 CRDI

Tires

Overall Dimensions

Others

Lubrication oil for Arjun Novo 605 CRDI

Time intervals of changing oil, lubricants and other parts for Arjun Novo 605 CRDI:

• First engine oil and filter change at 100 hours and after first change of oil, change oil at every 400 hours interval. (NOTE: if Mahindra Mstar premium oil is not used and any another oil similar grades is used then interval of changing oil and filter will be 250 hours.)
• 1300 hours interval for changing transmission oil and transmission filter with bigger size i.e.10 micron. (NOTE: Common oil is used for transmission, hydraulics and steering.)
• Lubrication as required according to condition.
• Duration for changing front 4 WD axle oil is 100 hours for first service and after that change oil after every 1300 hours interval.

Parts which are covered in warranty of tractor:

• All gaskets except cylinder head gasket.
• Air filter elements, hose clips & mirror.
• Drive belts.
• Fasterners.
• Electrical bulb.
• Brake lining.
• Filters & strainer.
• Clutch lining.
• Electrical fuses.
• Front bull bar.
• Driving seat cushion.
• Fiber canopy and front mud guard.
• Jerry can weight.

Apart from these part warranty is liable for accessories.

Warranty parts which are provided by respective suppliers, not by the company.

• Battery, alternator and starter motor.
• Tires.
• High pressure pump, rail and injector.
• ECU.

Warranty of these parts will be provided by respective suppliers and company will not be responsible for the warranty of these parts.

This warranty is for 24 months or 2000 hours (whichever will be earlier) and in the 3rd or 3000 hours only engine is covered in warranty. To take benefits warranty customers have to follow proper service schedule and use company recommended oil or oil equivalent grade. Damage in any part caused by personal injuries & carelessness of operator will not be covered in warranty.

NOTE:- The above information provided for warranty is applicable in year 2022 and in future company may change anytime warranty conditions and terms.

Before starting tractor please pay special attention to following points:

• Check all danger and warning symbols in instrument cluster.
• Wear proper safety gears.
• Take a look to proper working of clutch, brakes and other mechanical parts.
• Check level of coolant in radiator and leakage of coolant or oil any part of tractor and if there is any then please contact to nearest authorized service center.
• Check level oil in engine, transmission and hydraulic oil chamber.
• Check level of water in water separator and if there is excess then drain to avoid any harm to fuel system.
• Check tire pressure according to application.

Before standing tractor for more than 30 days follow these points mentioned below:

• Wash complete tractor and dry it properly.
• Lubricate tractor according to lubrication chart.
• Drain the water trap, fuel tank, and fuel filters.
• Drain old lubricating oil from engine and fill new oil up to recommended level.
• Keep engine idle for a moment after that switch off the engine.
• Drain out the coolant from tractor.
• Block all orifices of tractor which forms contact of tractor’s internal parts to atmosphere with clothes or any other thing.
• There should be no load on hydraulic line i.e. any implement or weight at rear lifts.
• Provide extra support of jacks and clear off the tires from the ground.
• Remove the battery and store at a dry and cool place.
• Tractor should parked under roof or cover it with protection cover.

Tractor’s instrument cluster:

• Tachometer, hour meter and trip meter with reset button.
• Fuel level bar graph system.
• Transmission neutral indicator.
• Temperature indicator.
• 4 wheel drive engagement indicator.
• Air filter clog indicator and high temperature warning indicator.
• Low engine oil pressure indicator.
• Battery charging indicator and parking brake indicator.
• Service reminder.
• Turn indicator.
• Water in fuel filter indicator i.e. this light blows when there extra water in filters.
• Clutch override and rear & front PTO engagement indicator.
• MIL and EQL indicator.
• Intake manifold heater indicator.
• Three modes which provides difference power to tractor according to situations.

Do’s for tractor’s long life:

• Check all safety shields.
• All lights should be in off position before starting the tractor.
• Clean air cleaner filter.
• Lubricants should of correct grade and filled up to recommended level.
• If there is any warning light then investigate immediately.
• Maintain proper level of coolant in radiator.
• Maintain recommended tire pressure according to load and RPM.
• Check and adjust proper free play in clutch, brake paddle and alternator belt.
• Keep tractor at idle RPM after starting in morning for one minute.

Don’ts for long life of tractor:

• Don’t start the tractor at high idle RPM.
• Don’t operate tractor in close area in which there is no ventilation.
• Don’t rest your feet on brake and clutch paddle.
• Don’t run cold engine at high RPM.
• Don’t clean head light with harsh cloth because it may cause damage to glass which results to scratches.

Things to take care after every 10 hours:

• Check engine oil level.
• Check oil leakages.
• Clean power steering rod.
• Maintain proper air pressure in tires.

After every 50 hours:

• Check air cleaner connection hoses.
• Check fan belt tension.
• Clean radiator fins (air pressure should be applied from operator’s side to clean fins).
• Clean feed pump filter.
• Drain water from fuel filters.
• Check level of transmission oil.
• Grease all greasing nipples.
• Check front 4 WD axle oil level.

After 100 hours:

• Check and adjust cylinder head bolt with torque.
• Change engine oil and filters.
• Clean air cleaner primary filter and air cleaner hoses.
• Check and top up coolant level.
• Check radiator cap and clean radiator fins.
• Clean feed pump and drain out water from filters.
• Change primary fuel filter.
• Check clutch & brake paddle free play.
• Check transmission oil level.
• Tight all visible nuts and bolts with specific torque amount.
• Grease all nipples.
• Check and rectify oil leakages if any.
• Change front 4 WD axle oil and clean PS rod.
• Change front axle oil.
• Change suction filter (power steering filter).

Apart from this clean battery terminal, check electrolyte level , fuses, connect diagnostic tools and check DTC and finally reset due indicator.

After 500 hours:

• Check and adjust cylinder head bolt with specific torque amount.
• Change engine oil and engine oil filter.
• Check and adjust valve clearance.
• Clean primary air filter.
• Check and top up coolant level in radiator.
• Check radiator cap and clean radiator fins.
• Check and adjust alternator and fan belt tension and clutch & brake pedal free play.
• Drain water from fuel filter and clean feed pump.
• Check transmission oil level and grease oil greasing points.
• Tight old visible nut and bolts with torque and especially tight hub bolts also.
• Check front four wheel drive axle oil level and lubricant all greasing points in axle.
• Change power steering oil filter.
• Check all electrical system connections and connect diagnostic tool and check DTC and reset service due indicator.

Periodic maintenance chart for Arjun 605 CRDI:

Fuel saving tips:

• Always store fuel in a clean and rust free container.
• Follow proper maintenance schedule.
• Always check leakages of fuel.
• Don’t use half clutch instead of it use proper gear according situation.
• In case of black smoke visit nearest authorized dealership and troubleshoot the problem.
• Always set hydraulic depth and draft position levers according to soil condition before operating implement.
• Always use matching implements and run engine on proper RPM and gear.
• Use weights or do water ballasting if there wheel slippage.
• Maintain proper air pressure according to field conditions.
• Don’t apply sudden brakes and accelerate suddenly tractor.

More models:

New Holland 5620 CRDI TX plus full specifications & price

New Holland 5630 TX Plus CRDI specifications

Swaraj 855 fe full specifications, maintenance chart

New Holland 3630 TX Special Edition specifications