Indo Farm 3055 DI tractor price & full information

Indo Farm 3055 DI tractor has 4 cylinder naturally aspirated liquid cooled engine which can produce about 60 hp at 2200 engine rated RPM. Tractor’s engine can produce 225 Nm maximum torque. Tractor has dual clutch with 8 forwards + 2 reverse transmission system. Tractor has 52 PTO HP which is enough for difficult PTO applications. Tractor has 1800 kg rear weight lifting capacity with 3 point linkage system. Tractor has 63 liters diesel tank capacity and after full tank tractor provides long working hours. Here are full specifications of tractor:

Indo Farm 3055 DI tractor

Price

Price of Indo Farm 3055 DI tractor starts from Rs 8,50,000 and goes up to Rs 8,88,000 which is due to different area dealerships.

Engine:

SpecificationsData
1. Engine makeIndo Farm
2. Engine type4 cylinder
4 stroke
Naturally aspirated
Liquid cooled
Diesel engine
3. Maximum torque225 Nm
4. HP60 hp category
5. Bore*stroke105*118 mm
6. Displacement4088 CC
7. Engine rated RPM2200
8. Fuel injection pumpInline
9. Maximum engine RPM in tachometer3000
10. SFC194 gram per hour per hp
11. Idle RPM600 +- 50
12. Compression ratio19:1
13. Firing order1-3-4-2
14. Maximum idle RPM2400 +- 60
15, Air cleaner typeOil bath type/ dry type
16. Valve clearance0.30 mm for intake in cold
0.40 mm for exhaust in cold
17. Injection pressure250+8 kg/cm²
18. Fuel injection timing11+-1 degree before top dead center
19. Engine oil capacity12 liters
20. Cooling liquid capacity10.5 liters
21. Radiator cap pressure13 psi
Engine specifications

The Indo Farm 3055 tractor is equipped with a robust 4-cylinder, 4-stroke, naturally aspirated, and liquid-cooled diesel engine, showcasing the reliability and efficiency characteristic of Indo Farm engines. With a displacement of 4088 CC and a bore*stroke configuration of 105*118 mm, this engine operates at a maximum horsepower of 60 in its category. Generating a maximum torque of 225 Nm, the engine is designed to deliver optimal performance in a variety of agricultural tasks. The engine operates at a rated RPM of 2200, with a maximum engine RPM of 3000 as indicated on the tachometer. The fuel injection pump is inline, and the compression ratio is 19:1. The injection pressure is set at 250+8 kg/cm², and the fuel injection timing is 11+-1 degrees before top dead center. The engine’s idle RPM is maintained at 750+-50, with a maximum idle RPM of 2400+-60. The air cleaner type is either oil bath type or dry type, offering flexibility in different operating conditions. The valve clearance is set at 0.30 mm for intake in cold and 0.40 mm for exhaust in cold. The engine is also equipped with a 12-liter capacity for engine oil and a 10.5-liter capacity for cooling liquid, ensuring efficient and reliable performance over extended periods.

Transmission:

SpecificationsData
1. Clutch type & sizeDual clutch with 280 mm diameter
2. Transmission typeCombination of constant mesh
3. Number of gears8 Forwards + 2 Reverse
4. Clutch paddle free play20 to 25 mm
Transmission

The Indo Farm 3055 DI tractor boasts a robust transmission system designed to deliver optimal performance in diverse agricultural settings. Equipped with a dual clutch featuring a substantial 280 mm diameter, the tractor ensures efficient power transfer during operation. The transmission type employed is a combination of constant mesh, enhancing smooth gear engagement and overall reliability. With a versatile range of 8 forward gears and 2 reverse gears, the tractor offers flexibility to adapt to various tasks on the field. Additionally, the clutch paddle free play is set at 20 to 25 mm, allowing for a responsive and user-friendly clutch operation. This transmission configuration makes the Indo Farm 3055 DI tractor a dependable choice for farmers seeking efficiency and versatility in their agricultural endeavors.

Gear speed at engine rated RPM:

earSpeed in kmph with 16.9*28 rear tyres
Low 1st2.69
Low 2nd3.83
Low 3rd6.06
Low 4th8.21
High 1st10.79
High 2nd15.37
High 3rd24.27
High 4th32.93
Low reverse3.57
High reverse14.32
Gear Speeds

Brakes:

SpecificationsData
1. Brake typeOil immersed disc type (optional)
Dry disc type (standard)
2. Minimum turning radius with brakesNo data available
3. Minimum turning radius without brakesNo data available
4. Brake paddle free playNo data available
5. Number disc plates each side2 plates each side in dry brakes
4 plates each side in oil brakes
Brakes
Indo Farm 3055 DI tractor mileage test

Steering:

SpecificationsData
1. Mechanical steeringNo data available
2. Power steeringAvailable (standard)
3. Oil capacity for mechanical steeringNo data available
4. Oil capacity for power steeringNo data available
Steering system

PTO system:

SpecificationsData
1. Maximum PTO HP52
2. PTO speeds standardAvailable
3. PTO speeds ReverseAvailable in multi speed gear PTO
4. PTO speeds OptionalNo data available
Power Take Off

PTO speeds:

GearPTO speeds at rated RPM
1st417
2nd593
3rd937
4th1271
Reverse553
PTO speeds

Hydraulics:

SpecificationsData
1. TypeLive auto depth and draft control
2. Weight lifting capacity1800 kg with 3 point linkage system
3. Hydraulic pump flow at rated RPM22 liters per minute
Hydraulics

Tyre size and pressure according to condition:

Tyer sizePressure in fieldPressure on road
7.50*16 (front)32.7 psi32.7 psi
16.9*28 (rear)17 psi21 psi
Tyer size and pressure


The Indo Farm 3055 DI tractor is equipped with reliable and versatile tires to ensure optimal performance both in the field and on the road. The front tires, sized at 7.5016, maintain a consistent pressure of 32.7 psi, providing stability and traction during field operations. These tires also demonstrate the same pressure on the road, contributing to a smooth transition between different terrains. The rear tires, sized at 16.928, exhibit a field pressure of 17 psi, offering a balance between grip and soil protection during agricultural tasks. On the road, the rear tires adjust to a pressure of 21 psi, enhancing the tractor’s efficiency and fuel economy during transportation. The thoughtful selection of tire sizes and corresponding pressures on the Indo Farm 3055 DI tractor reflects a design that prioritizes versatility and performance across diverse operational environments.

Overall dimensions:

DimensionsMeasurements
1. Wheel base2280 mm
2, Overall length up to end of lower link3810 mm
3. Overall width with standard track1840 mm
4. Overall height up to top end of exhaust2300 mm
5. Minimum ground clearance under rear transmission housing410 mm
6. Total weight of tractor2460 kg without ballast
3480 kg with full ballast
2750 kg 4WD without ballast
3735 kg 4WD with full ballast
Overall dimensions

Others:

SpecificationsData
1. Battery12 volts, 88 Amps.
2. Alternator12 volts, 42 Amps.
3. Fuel tank63 liters
Others

More models:

Not enough data available for instrument cluster

Lubrication oil type and amount:

PartTypeAmount
Engine20W4012 liters
Cooling liquidNo data available10.5 liters
Air cleaner oil20W 401 liter
Power steeringCommon from transmissionCommon from transmission
Transmission and hydraulics commonEP 8055 liters
GreaseAP 3As required
Oil amount and type

The Indo Farm 3055 DI tractor relies on a carefully specified lubrication regimen to ensure optimal performance and longevity. The engine is fueled by 20W40 oil, requiring a generous 12 liters to maintain its efficiency. The air cleaner is serviced with 20W40 oil as well, with a modest 1-liter requirement. The power steering system draws its lubrication directly from the transmission, emphasizing seamless integration. For the transmission and hydraulics, the tractor employs EP 80 oil, with a substantial 55-liter capacity to facilitate smooth operation. Additionally, the maintenance protocol includes the use of AP 3 grease, applied as needed to various components, further enhancing the tractor’s overall functionality and durability. This meticulous lubrication strategy underscores Indo Farm’s commitment to ensuring that the 3055 DI tractor operates at its peak performance levels.

Implement selection for Indo Farm 3055 DI:

ImplementType
Cultivator11 to 13 tyne
Disc harrow16 disc
Rotavator48 blades
Trolly7 tons
M.B. plough3 bottom
Perfect implement selection

Troubleshooting Indo Farm 3055 DI tractor:

Here are some common problem and their possible reasons which may happen in tractor after a long time of use or in poor maintenance:

  • Engine not starting:
    • Low fuel level.
    • Air trapped in fuel lines.
    • Blockage in fuel filters.
    • Wrong adjustment valve clearance.
    • Fault in fuel injection pump.
  • Engine not attaining maximum power:
    • Water in fuel.
    • Air cleaner element clogged.
    • Fault in injector.
    • Engine is overheated.
    • Wrong implement selection.
  • High fuel consumption:
    • Wrong adjustment of valve clearance.
    • Air cleaner element clogged.
    • Low tyre pressure.
    • Wrong selection of grade of engine oil.
    • Fault in fuel injection timing.
    • Fault in fuel injector.
  • Engine overheating:
    • Low level of cooling liquid.
    • Engine overloading.
    • Radiator fins are blocked.
    • Fault in radiator cap.
    • Internal blockage of radiator.
    • Fault in thermostat valve.
    • Fault in temperature gauge.
    • Blockage in engine oil filters.
    • Air cleaner element is blocked.

Periodic maintenance chart for Indo Farm 3055 DI tractor:

Clean air cleaner bowl after every 10 hours of use.

JobsAfter 50 hoursAfter 100 hoursAfter 200 hoursAfter 300 hours
1. Check and top up transmission oil
2. Check and tight fan belt
3. Grease front wheel hub
4. Clean radiator fins
5. Grease front axle spindles
6. Grease all lubrication points
7. Check and tight all nuts and bolts
8. Adjust clutch and brake paddle free play
9. Check leakage in transmission and rear housing
10. Change engine oil and oil filter
11. Adjust brake paddle according to perfect working
12. Check and top up oil in steering box if provided
13. Change primary fuel filter
14. Clean diesel filter of tank tap
15. Clean oil breather pipe
16. Clean air cleaner element
17. Check wheel alignment
Periodic maintenance chart for Indo Farm 3055 DI tractor

NOTE: If tractor is driven in dusty air conditions then air cleaner element should be cleaned early.

JobsAfter 600 hoursAfter 1000 hoursAfter 1200 hoursAfter 1600 horus
18. Change secondary fuel filter
19. Clean radiator and change cooling liquid
20. Clean rear axle bearing
21. Check and adjust valve clearance
22. Check steering arm cap
23. Check transmission oil level and top up
24. Check alternator
25. Service of fuel injector
26. Clean oil pump strainer
27. Clean fuel tank
28. Change steering oil
29. Change transmission oil
30. Check and adjust valve clearance
Periodic maintenance chart

Tractor's engine oil capacity is 12 liters with 20W40 grade, while transmission oil capacity is 55 liters with EP 80 grade.

Tractor has 1800 kg weight lifting capacity with 3 point linkage system which can lift up heavy agriculture implements.

Tractor has 63 liters fuel tank capacity and after full tank tractor provides long working hours and tension free ride to the farmer.

Leave a Comment


The reCAPTCHA verification period has expired. Please reload the page.