John Deere 5036 D tractor has 3 cylinder naturally aspirated liquid cooled engine with 2939.71 CC displacement which produce about 36 hp at 2100 engine rated RPM. Tractor can produce about maximum 146 Nm torque at 1200 engine RPM. Tractor has 30.84 PTO HP at rated engine RPM. Tractor has 1400 kg weight lifting capacity. Tractor has 60 litres fuel tank capacity which is quiet good for long time working applications. Here are full specification about tractor:
Price
Price of John Deere 5036 tractor starts Rs 6,42,000 and goes up to Rs 7,14,860 which is due to different area dealerships.
Engine
| Specifications | Data |
|---|---|
| 1. Engine Make | John Deere |
| 2. Engine Type |
|
| 3. Max Torque | 146 Nm torque at 1200 rpm |
| 4. HP | 36 hp |
| 5. Bore*Stroke (MM) | 106.5*110 mm |
| 6. Displacement | 2939.71 CC |
| 7. Engine rated RPM | 2100 |
| 8. Pump | Inline bosch |
| 9. Max engine RPM in tachometer | 3000 |
| 10. SFC | No data available |
| 11. Idle RPM | 850 +- 50 |
| 12. Max. idle RPM | 2300 +-50 |
| 13. Compression ratio | 18.5:1 |
| 14. Working RPM range | 1400 to 2100 |
| 15. Fuel injections timing | 12.5° BTDC |
Transmission
| Specifications | Data |
|---|---|
| 1. Clutch type & size | Single (size not available) |
| 2. Transmission | Collar shift with 8F + 4R |
| 3. Clutch paddle free play | 20-25 mm |
Gear speed chart of tractor with 12.4*28 rear tires:
| Gears | With Low speed planetry system | With high speed planetry system |
|---|---|---|
| speed in kmph | speed in kmph | |
| A1 | 2.74 | 3.13 |
| A2 | 4.02 | 4.6 |
| A3 | 6.27 | 7.18 |
| A4 | 9.9 | 11.32 |
| B1 | 8.26 | 9.44 |
| B2 | 12.15 | 13.88 |
| B3 | 18.94 | 21.69 |
| B4 | 29.91 | 34.18 |
| R1 | 3.6 | 4.1 |
| R2 | 5.29 | 6.03 |
| R3 | 8.24 | 9.42 |
| R4 | 13.01 | 14.84 |
Gear speed chart of tractor with 13.6*28 rear tires:
| Gears | With Low speed planetry system | With high speed planetry system |
|---|---|---|
| speed in kmph | speed in kmph | |
| A1 | 2.83 | 3.23 |
| A2 | 4.16 | 4.75 |
| A3 | 6.5 | 7.42 |
| A4 | 10.24 | 11.70 |
| B1 | 8.54 | 9.76 |
| B2 | 12.56 | 14.36 |
| B3 | 19.62 | 22.42 |
| B4 | 30.92 | 35.34 |
| R1 | 3.71 | 4.24 |
| R2 | 5.45 | 6.23 |
| R3 | 8.52 | 9.74 |
| R4 | 13.43 | 15.34 |
Brakes
| Specifications | Data |
|---|---|
| 1. Type | Mechanical Wet disc Brakes |
| 2. Minimum turning radius with brakes | 2.9 meters |
| 3. Minimum turning radius without brakes | 3.2 meters |
| 4. Brake paddle free play | 20 to 30 mm |
Steering
| Specifications | Data |
|---|---|
| 1. Mechanical | Not available |
| 2. Power | Available (standard) |
| 3. Oil capacity (power steering) | There is no separate oil tank for power steering oil. |
PTO
| Specifications | Data |
|---|---|
| 1. PTO HP @ Rated RPM | 30.84 HP |
| 2. PTO speeds-Standard | Available 6 spline (540 PTO RPM at 2050 engine RPM) |
| 3. PTO speeds – Economy | Not available |
| 4. PTO speeds – Reverse | Not available |
| 5. PTO speeds – Ground speed | Not available |
Hydraulics
| Specifications | Data |
|---|---|
| 1. Type | Live Auto depth and draft control |
| 2. Lift capacity | 1400 kg with three point linkage system. |
Tyres
| Specifications | Data |
|---|---|
| 1. Front tyre size | 6.0*16 with 8 PR(standard) |
| 2. Rear tyre size | 12.4*28 13.6*28 |
Tyre pressure according to conditions
| Tyre | Without heavy load | With ballast or heavy equipment |
|---|---|---|
| 6.00*16 | 23 psi | 40 psi |
| 12.4*28 | 12 psi (in field also) | 20 psi (on road also) |
| 13.6*28 | 13 psi (in field also) | 18 psi (on road also) |
Overall dimensions
| Specifications | Data |
|---|---|
| 1. Wheel base | 1950 mm |
| 2. Overall length | 3290 mm |
| 3. Overall width | 1745 mm |
| 4. Overall height (up to exhaust pipe) | 2200 mm |
| 5. MIN. Ground clearance | 380 mm |
| 6. Weight of tractor | 1760 kg |
Others
| Specifications | Data |
|---|---|
| 1. Battery | 12 V, 88 Ah |
| 2. Alternator | 42 Amps. |
| 3. Fuel tank capacity | 60 Litres |
Oil & Lubrications
| Part | Amount | Type |
|---|---|---|
| Engine | 6.5 litres | SAE 15W-40 |
| Transmission & Hydraulics | 30 litres for grease axle 32 litres for oil axle | BIO-HY-GARD |
| Coolant | 9.8 litres | John Deere COOL-GARD II |
| Grease | As required | John Deere GREASE-GARD |
Instrument cluster
- Tachometer with 3000 maximum engine RPM.
- Air filter clog indicator.
- Hour meter.
- High beam indicator.
- Coolant temperature indicator.
- Turn indicator lights.
- Fuel gauge.
- Engine oil pressure indicator.
- System charging indicator.
Troubleshooting
Here are some basic and advance problem which may happen and their possible reasons are also given below:
- Engine not starting or starting with difficulty.
- Wrong starting method.
- Low fuel level.
- Air trapped in fuel line.
- Selection of wrong fuel type.
- Fuel filters clogged.
- Very low temperature of coolant.
- Fault in fuel pump.
- Engine overheating.
- Fault in injection nozzle.
- Valve clearance is wrong.
- Low power output:
- Engine overloading.
- Air intake clogged.
- Blockage in fuel filters.
- Engine overheating.
- Low temperature for engine working.
- Fault in thermostat.
- Wrong valve clearance setting.
- Fault in fuel injection pump.
- Blockage in fuel injectors.
- Wrong ballasting.
- Low engine oil pressure:
- Low level of engine oil.
- Wrong grade of engine oil is used.
- Fault in oil pressure gauge.
- Leakage of engine oil.
- White smoke problem:
- Selection of wrong fuel.
- Fault in thermostat.
- Low temperature for working of engine.
- Fault in injection nozzles.
- Cold start may be one of the reasons.
- Wear & tear in piston rings and cylinder walls.
- Black smoke problem:
- Air filter clogged.
- Selection of wrong fuel type.
- Fault in injector nozzles.
- Engine overloading.
- Life of engine is completed.
- Engine overloading:
- Radiator fins are clogged.
- Engine overloading.
- Level of engine is low.
- Low level of coolant.
- Fault in radiator cap.
- High tension in fan belt.
- Fault in thermostat.
- Fault in temperature gauge.
- High fuel consumption:
- Air filter clogged.
- Setting of valve clearance is wrong.
- Engine overloading.
- Fault in injection nozzles.
- Selection of wrong implement behind the tractor.
- Water ballasting is very low or very high.
- Blockage in air intake system.
- Blockage in crankcase tube.
- Selection of wrong gear.
- Fault in injection pump.
- Life of engine is complete.
Implement selection table
Selection of perfect implement behind tractor in field is very important for low fuel consumption and best performance. Here is the table to better understand implement selections:
| Implement | Type |
|---|---|
| MB plough | 2 bottom |
| Reversible MB plough | 1 bottom |
| Disc plough | 2 disc |
| Offset Disc harrow | 12 and 14 discs |
| Trailed disc harrow | 12 to 14 discs |
| Cultivator | 7 to 9 tines |
| Rotavator | 1.25 metre |
Selection of gear will depend condition of soil that’s why recommended are not shown here.
Periodic Maintenance Chart
| Jobs | ||||
|---|---|---|---|---|
| 250 | 500 | 600 | 1250 | |
| Change engine oil & oil filters | ✓ | |||
| Service of air cleaner | ✓ | |||
| Change fuel filters | ✓ | |||
| Check condition of fan belt | ✓ | |||
| Lubrication of 3 points hitch | ✓ | |||
| Check neutral start switch system | ✓ | |||
| Change transmission-hydraulic filter | ✓ | |||
| Lubrication of rockshaft control support lever | ✓ | |||
| Change oil MFWD axle | ✓ | |||
| Clean engine crankcase tube | ✓ | |||
| Check & tight hoses and hoses clips | ✓ | |||
| Lubricate rear axle bearings | ✓ | |||
| Check engine idle speed | ✓ | |||
| Check front axle pivot pins | ✓ | |||
| Tight front turning bolts | ✓ | |||
| Check water separator tap | ✓ | |||
| Change trasmission oil & oil fiter | ✓ | |||
| Clean transmission, hydraulic pickup screen | ✓ | |||
| Change air cleaner element | ||||
| Flushing of coolant | ||||
Secondary air cleaner element should be changed once in a year but if environmental condition are very dusty then this period will be less and for that you have to contact to nearest dealership.
After 2 years coolant should be flushed and new coolant should be filled.
Apart from this chart there are some things which should be inspected daily which are:
- Check engine oil level.
- Check coolant level daily.
- Drain out water from fuel filters.
- Grease all lubrication points.
- Check air pressure in tyres.
Things which should be inspected after 50 hours:
- Check and top up transmission and hydraulic oil level.
- Grease front axle pivot pins.
- Lubricate steering spindles.
- Lubricate clutch and brake paddle greasing pins.
- Adjust free play in clutch and brake paddle and check tension in fan belt.
- Check battery terminal connection and if there corrosion then remove it then clean terminals and then apply some petroleum jelly to terminals.
There many things in this tractor which are similar to John Deere 5039 D tractor
More models:
John Deere 5050 D full specification & Gear speeds
John Deere 5042D tractor full specifications & Gear speeds
John Deere 5038D hp, full specifications & gear speeds