John Deere 5038D hp, full specifications: tractor has 3 cylinder naturally aspirated liquid cooled engine with 2939 CC displacement which can produce about 38 at 2100 engine rated RPM. Tractor has single and dual clutch both options with 8 forwards and 4 reverse gear with collarshift technology. Tractor has 60 litres fuel tank capacity. Tractor can produce 150 Nm torque at 1200 engine RPM. Here are full specifications of tractor:
Price
Price of John Deere 5038 D tractor starts from Rs 6,45,000 and goes up to Rs 7,25,300.
Engine
| Specifications | Data |
|---|---|
| 1. Engine Make | John Deere |
| 2. Engine Type |
|
| 3. Max Torque | 150 Nm torque at 1200 rpm |
| 4. HP | 38 hp |
| 5. Bore*Stroke (MM) | 106.5*110 mm |
| 6. Displacement | 2939.71 CC |
| 7. Engine rated RPM | 2100 |
| 8. Pump | Inline Bosch |
| 9. Max engine RPM in tachometer | 3000 |
| 10. SFC | No data available |
| 11. Idle RPM | 850 +- 50 |
| 12. Max. idle RPM | 2300 +-50 |
| 13. Compression ratio | 18.5:1 |
| 14. Working RPM range | 1400 to 2100 |
| 15. Fuel injections timing | 13.5° BTDC |
Transmission
| Specifications | Data |
|---|---|
| 1. Clutch type & size | Single & dual (size not available) |
| 2. Transmission | Collar shift with 8F + 4R |
| 3. Clutch paddle free play | 20-25 mm |
Gear speed chart of tractor with 12.4*28 rear tires:
| Gears | With Low speed planetry system | With high speed planetry system |
|---|---|---|
| speed in kmph | speed in kmph | |
| A1 | 2.74 | 3.13 |
| A2 | 4.02 | 4.6 |
| A3 | 6.27 | 7.18 |
| A4 | 9.9 | 11.32 |
| B1 | 8.26 | 9.44 |
| B2 | 12.15 | 13.88 |
| B3 | 18.94 | 21.69 |
| B4 | 29.91 | 34.18 |
| R1 | 3.6 | 4.1 |
| R2 | 5.29 | 6.03 |
| R3 | 8.24 | 9.42 |
| R4 | 13.01 | 14.84 |
Gear speed chart of tractor with 13.6*28 rear tires:
| Gears | With Low speed planetry system | With high speed planetry system |
|---|---|---|
| speed in kmph | speed in kmph | |
| A1 | 2.83 | 3.23 |
| A2 | 4.16 | 4.75 |
| A3 | 6.5 | 7.42 |
| A4 | 10.24 | 11.70 |
| B1 | 8.54 | 9.76 |
| B2 | 12.56 | 14.36 |
| B3 | 19.62 | 22.42 |
| B4 | 30.92 | 35.34 |
| R1 | 3.71 | 4.24 |
| R2 | 5.45 | 6.23 |
| R3 | 8.52 | 9.74 |
| R4 | 13.43 | 15.34 |
Brakes
| Specifications | Data |
|---|---|
| 1. Type | Mechanical Wet disc Brakes |
| 2. Minimum turning radius with brakes | 2.9 meters |
| 3. Minimum turning radius without brakes | 3.2 meters |
| 4. Brake paddle free play | 20 to 30 mm |
Steering
| Specifications | Data |
|---|---|
| 1. Mechanical | Not available |
| 2. Power | Available (standard) |
| 3. Oil capacity (power steering) | There is no separate oil tank for power steering oil. |
PTO
| Specifications | Data |
|---|---|
| 1. PTO HP @ Rated RPM | 32.4 for V2 model and 35 for simple model |
| 2. PTO speeds-Standard | Available (540 PTO RPM at 2050 engine RPM) |
| 3. PTO speeds – Economy | 540 PTO RPM at 1600 engine RPM |
| 4. PTO speeds – Reverse | Not available |
| 5. PTO speeds – Ground speed | Not available |
Hydraulics
| Specifications | Data |
|---|---|
| 1. Type | Live Auto depth and draft control |
| 2. Lift capacity | 1400 kg with three point linkage system. |
Tyres
| Specifications | Data |
|---|---|
| 1. Front tyre size | 6.0*16 with 8 PR(standard) |
| 2. Rear tyre size | 12.4*28 13.6*28 |
Tyre pressure according to conditions
| Tyre | Without heavy load | With ballast or heavy equipment |
|---|---|---|
| 6.00*16 | 23 psi | 40 psi |
| 12.4*28 | 12 psi (in field also) | 20 psi (on road also) |
| 13.6*28 | 13 psi (in field also) | 18 psi (on road also) |
Overall dimensions
| Specifications | Data |
|---|---|
| 1. Wheel base | 1950 mm |
| 2. Overall length | 3290 mm |
| 3. Overall width | 1745 mm |
| 4. Overall height (up to exhaust pipe) | 2200 mm |
| 5. MIN. Ground clearance | 380 mm |
| 6. Weight of tractor | 1795 kg |
Others
| Specifications | Data |
|---|---|
| 1. Battery | 12 V, 88 Ah |
| 2. Alternator | 42 Amps. |
| 3. Fuel tank capacity | 60 Litres |
Oil & Lubrications
| Part | Amount | Type |
|---|---|---|
| Engine | 6.5 litres | SAE 15W-40 |
| Transmission & Hydraulics | 30 litres for grease axle 32 litres for oil axle | BIO-HY-GARD |
| Coolant | 9.8 litres | John Deere COOL-GARD II |
| Grease | As required | John Deere GREASE-GARD |
Instrument cluster
- Tachometer with 3000 max engine RPM.
- Air cleaner choke indicator.
- High beam indicator.
- Hour meter.
- Battery charging indicator.
- Coolant temperature indicator.
- Engine oil pressure indicator.
- Turn direction signal indicator.
- Fuel gauge.
Troubleshooting
Here are some basic problems and their solutions below each problem:
- Engine not starting.
- Wrong starting method.
- No fuel in fuel tank.
- Air trapped in fuel line.
- Wrong engine oil grade.
- Water in fuel filters.
- Fuel filters clogged.
- Fault in fuel injectors.
- Fault in fuel pump.
- Abnormal working of engine.
- Low temperature of coolant.
- Fault in injectors.
- Air trapped in fuel line.
- Low engine temperature.
- Fault in temperature gauage.
- Low idle RPMs are not correct.
- Low power output.
- Wrong valve clearance setting.
- Fault in working method of throttle paddle & lever.
- Fuel filters clogged.
- Overheating of engine.
- Low temperature for working of engine.
- Faulty fuel injectors.
- Wrong ballasting in tyres.
- Low oil pressure.
- Low level of engine oil.
- Wrong grade of engine oil.
- Engine oil consumption.
- Leakage of engine oil.
- Light engine oil.
- Crankcase tube blocked.
- White smoke from exhaust.
- Wrong fuel selection.
- Low temperature for working of engine.
- Faulty thermostat.
- Faulty injection nozzles.
- Life of engine is over.
- Cold start & light load.
- Black smoke from exhaust.
- Selection for wrong fuel.
- Air cleaner clogged.
- Engine overload.
- Fault in injection nozzle.
- Life of engine is over.
- Engine overheating.
- Fins of radiator are clogged.
- Engine overloading.
- Low level of engine oil.
- Low level of coolant.
- Fault in radiator cap.
- Loose fan belt.
- Fault in thermostat.
- Wrong grade of engine oil.
- There is need of flushing coolant.
- High fuel consumption.
- Air filter clogged.
- Wrong valve clearance.
- Fault in injection nozzles.
- Selection of wrong implement.
- High ballasting in tyres.
- Crankcase tube blocked.
- Wrong tyre pressure.
- Lack of lubrication in bearings.
- Life of engine is over.
- Overheating of transmission oil.
- Low level of transmission oil.
- Transmission filter blocked.
- Wrong setting of hydraulic system.
- Leakage of transmission oil.
To get maximum performance of tractor in minimum fuel consumption it is must to select proper implement according tractor, here is the implement selection chart:
Implement selection
| Implement | Type |
|---|---|
| MB plough | 2 bottom |
| Reversible MB plough | 1 bottom |
| Disc plough | 2 disc |
| Offset Disc harrow | 12 and 14 discs |
| Trailed disc harrow | 12 to 14 discs |
| Cultivator | 7 to 9 tines |
| Rotavator | 1.25 metre |
NOTE: Gear selection varies from area to area, soil condition and sometimes weight of implement that’s why gear selection is shown above.
Things to inspect daily or after every 10 hours:
- Check engine oil level.
- Check coolant level daily.
- Drain out water from fuel filters.
- Grease all lubrication points.
- Check air pressure in tyres.
Things to inspect after every 50 hours:
- Check level of transmission-hydraulic oil level.
- Check MFWD axle oil level.
- Clean battery & there should be no corrosion on the terminals.
- Grease front axle pivot pins.
- Grease steering spindles.
- Lubricate clutch & brake paddles.
- Check free play in clutch, brake paddles and fan belt tension.
Periodic Maintenance Chart
| Jobs | ||||
|---|---|---|---|---|
| 250 | 500 | 600 | 1250 | |
| Change engine oil & oil filters | ✓ | |||
| Service of air cleaner | ✓ | |||
| Change fuel filters | ✓ | |||
| Check condition of fan belt | ✓ | |||
| Lubrication of 3 points hitch | ✓ | |||
| Check neutral start switch system | ✓ | |||
| Change transmission-hydraulic filter | ✓ | |||
| Lubrication of rockshaft control support lever | ✓ | |||
| Change oil MFWD axle | ✓ | |||
| Clean engine crankcase tube | ✓ | |||
| Check & tight hoses and hoses clips | ✓ | |||
| Lubricate rear axle bearings | ✓ | |||
| Check engine idle speed | ✓ | |||
| Check front axle pivot pins | ✓ | |||
| Tight front turning bolts | ✓ | |||
| Check water separator tap | ✓ | |||
| Change trasmission oil & oil fiter | ✓ | |||
| Clean transmission, hydraulic pickup screen | ✓ | |||
| Change air cleaner element | ||||
| Flushing of coolant | ||||
Time period for cleaning of air cleaner element may be early because of environmental conditions and to better understand about it you have to visit nearest authorized service center.
After 2 years jobs:
- Change water separator.
- Flush cooling system.
- Check and adjust throttle friction.
There are some job which will be performed according to need:
- Changing of alternator/fan belt.
- Servicing/replacement of battery.
- Cleaning of grills and fins of radiator.
- Bleeding of fuel system.
- Adjustment of headlights focus.
- Changing/retreading of tyres.
More models:
New Holland 5620 CRDI TX plus full specifications & price