Swaraj 724 XM Orchard NT full specifications

Swaraj 724 XM Orchard NT (Narrow Track) tractor has 2 cylinder naturally aspirated liquid cooled engine (similar used in other 2 cylinder models) with 1824 CC displacement which can produce about 25 to 30 hp at 1800 engine rated RPM. Tractor has single clutch with 280 mm diameter and 8 forwards and 2 reverse transmission. Tractor has 25 liters fuel tank capacity. Tractor has 1000 kg weight lifting capacity with 3 points linkage system which is suitable for category I and II type implement pins. Here are some more specifications of tractor:

There are some major differences between this tractor and Swaraj 724 XM orchard tractor which are listed below:

  • This tractor is Narrow Track type tractor while Swaraj 724 XM orchard has little bit wider than this model.
  • This tractor has standard 540 PTO RPM with 6 spline PTO shaft while in Swaraj 724 XM orchard tractor has 21 spline PTO shaft with 1000 PTO RPM.
  • This model has less ground clearance than Swaraj 724 XM orchard i.e. this model has G.C. 220 mm and another models has G.C. 235 mm.
  • This tractor has 1495 kg weight while Swaraj 724 XM orchard has 1470 kg total weight.
  • There is some difference gear speeds in both models and for that check gear speed table.

Engine

Specifications Data
1. Engine Make Swaraj
2. Engine model RV-2 TR
3. Engine Type
  • 2 Cylinder
  • 4 Stroke
  • Naturally aspirated
  • Liquid Cooled
  • Direct Injection
  • Diesel Engine
4. Max TorqueNo data available
5.HP25 hp category (25-30 HP)
6. Bore*Stroke (MM)100*116 mm
7. Displacement1824 cc
8. Engine rated RPM1800
9. PumpInline bosch
10. Max engine RPM in tachometer2400
11. SFCNo data available
12. Idle RPM650 -+ 50
13. Firing order1-2
14. Intake valve clearance0.25 mm
15. Exhaust valve clearance0.35 mm
16. Fan belt tension10 to 12 mm

Transmission

Specifications Data
1. Clutch type & sizeSingle clutch with 280 mm
2. GearboxConstant mesh (8F + 2R)
3. Free play in clutch paddle20-25 mm

Gear speed at engine rated RPM

GearsGear speed in kmph with 9.5*24 tyres
L12.2
L24.3
L35.9
L4NA
H18.7
H216.9
H323.3
H4NA
LR2.2
HR8.7

Brakes

Specifications Data
1. TypeWet Brakes
2. Minimum turning circle radius with brakes (mm)No data available
3. Minimum turning circle radius without brakes (mm)No data available
4. Brake paddle play35-40 mm

Steering

Specifications Data
1. MechanicalAvailable
2. PowerNot available
3. Oil capacity (mechanical steering RANE)0.6 liter
4. Oil capacity (mechanical steering ZF)0.45 liter

PTO

SpecificationsData
1. PTO HP @ Rated RPMNo data available
2. PTO speeds-Standard (540 RPM)Available with 6 spline
3. PTO speeds – EconomyNot available
4. PTO speeds – ReverseNo data available
5. PTO speeds – Multi speedNot available

Hydraulics

Specifications Data
1. TypeLive Auto depth and draft control
2. Lift capacity1000 kg
3. AdditionalEasy lift lever

Tires

Specifications DataTyre pressure
1. Front tyre size5.00*1524 to 28 psi in field and 28 to 30 psi on road
2. Rear tyre size11.2*24
9.5*24
16 to 18 psi in haulage
14 to 16 psi in field

OVREALL DIMENSIONS

Specifications Data
1. Wheel base1575 mm
2. Overall length2900 mm
3. Overall width1092 mm
4. Overall height1340 mm
5. MIN. Ground clearance220 mm
6. Weight of tractor1495 kg

OTHERS

Specifications Data
1. Battery12 V , 80 Ah
2. Alternator No data available
3. Fuel tank capacity25 Litres
4. Air cleaner typeOil bath type
Swaraj 724 XM Orchard NT

Here is the details about instrument cluster of tractor:

  • Engine tachometer with 2400 maximum engine RPM.
  • Engine temperature gauge.
  • Volt meter.
  • Fuel gauge.
  • Turn indicator lights.
  • High beam indicator.
  • Trailer light indicator.
  • Analog hour meter.

For fuel saving tips visit Swaraj 855 tractor page because tips for fuel saving are almost same for both the tractors.

Here is some details about lubrication oil type and amount for the tractor:

Oil type, capacities & duration

PartsAmountTypeDuration
Engine oil5.6 liter20W40250 hours
Air cleanerNo data available20W4050 hours
Differential housing29 litersNo data availableNo data available
Transmission with wet brakesNATRACTELF 23711600 hours
Coolant6 litersNo data availableNo data available

NOTE: Grade of lubrication oil may change with weather conditions and other environmental conditions and for that visit nearest authorized Swaraj service provider.

Here are some details about implement selection for the tractor:

Implement selection

ImplementTypeRecommended Gear
Cultivator9 tines1st high
Harrow12 (trailed)1st high
Bottom plough2 bottom3rd low
Trolly load capacity4 to 6 tonsAccording to situation

Here is full detail about Periodic Maintenance Chart of the tractor:

Periodic maintenance chart for Swaraj 724 XM

JobsHours
10First 50150300
1. Clean whole tractor
2. Tight nuts & bolts
3. Greasing of all points
4. Check air pressure in tires
5. Check sources of leakages if any
6. Check free play in clutch & brake paddle
7. Check & top up engine oil level
8. Check air cleaner oil level
9. Clean air pre cleaner bowl
10. Drain out water from filter
11. Check and adjust fan belt tension
12. Change engine oil & oil filter
13. Check & adjust valve clearnance
14. Check & tight manifold leakage
15. If there is leakage in cylinder head valve then grind it
16. Removal of carbon form piston & cylinder head
17.Check & top up level of coolant
18. Clean radiator fins
19. Flush radiator
20. Clean fuel injection pump sediment bowl
21. Check & top up fuel pump oil level
22. Clean fuel tank & fuel cock
23. Change primary fuel filter
24. Change secondary fuel filter
25. Check injector & clean nozzle and adjust pressure
26. Do proper alignmet of front wheels
27. Grease front wheel’s bearings
28. Interchane front tires
29. Check & top up steering box oil (Mechanical)
30. Check & top up transmission oil
Clean hydraulic oil strainer
31. Change transmission oil filter
32. Check electrolyte level in battery
33. Clean battery terminal
34. Check electrical connections & if loose then tight
Jobs10First 50150300
JobsHours
5508001050
1. Change engine oil & oil filer
2. Check & adjust valve clearance
3. Check cylinder head valve leakage ( if leakage then grinding )
4. Removal of carbon from piston & cylinder head
5. Flush radiator
6. Change primary fuel filter
7. Change secondary fuel filter
8. Service of nozzle and injector service
9. Grease front wheel bearings
10. Interchange fron tires
11. Check steering box oil level
12. Clean hydraulic oil strainer
13. Change transmission oil fitler
14. Check electrical system
15. Change transmission oilAfter every 1600 hours
Jobs5508001050

More models:

Leave a Comment


The reCAPTCHA verification period has expired. Please reload the page.