Swaraj 855 XM tractor has 3 cylinder naturally aspirated liquid cooled engine with 3480 CC displacement which can produce about 50 to 55 hp at 1800 engine rated RPM. Tractor has single clutch option with 305 mm diameter, Dual type clutch option with 280 mm diameter and Double clutch option with 310 mm diameter each, Further tractor has 8F+2R gearbox system with side shift levers. Tractor has 1700 kg weight lifting capacity at lower links with 3 points linkage system. Tractor has 60 liters fuel tank capacity. Here are some specifications of tractor:
Engine
Specifications | Data |
---|---|
1. Engine Make | Swaraj |
2. Engine model | RB-33 XM |
3. Engine Type |
|
4. Max Torque | No data available |
5.HP | 55 hp category (50-55 HP) |
6. Bore*Stroke (MM) | 110*122 mm |
7. Displacement | 3480 cc |
8. Engine rated RPM | 1800 |
9. Pump | Inline bosch |
10. Max engine RPM in tachometer | 2400 |
11. SFC | No data available |
12. Idle RPM | 650 -+ 50 |
13. Firing order | 1-2-3 |
14. Intake valve clearance | 0.25 mm |
15. Exhaust valve clearance | 0.35 mm |
16. Nozzle injection pressure | 260+10 kg/cm2 |
17. Speed of maximum torque | 1000 to 1400 |
18. Compression ratio | 19.2(+-5):1 |
Transmission
Specifications | Data |
---|---|
1. Clutch type & size | Dual clutch with 280 mm diameter Single clutch with 305 mm diameter Double clutch with 310 mm diameter |
2. Gearbox | 8 Forwards + 2 Reverse |
3. Free play in clutch paddle | 20-25 mm |
Unfortunately there is not so much data available for Gear speed but here is a little information:
Minimum & Maximum gear speeds
Speeds | Forwards | Reverse |
---|---|---|
Minimum | 2.7 | 2.8 |
Maximum | 32.4 | 10.8 |
Brakes
Specifications | Data |
---|---|
1. Type | Wet disc Brakes |
2. Minimum turning circle radius with brakes (mm) | No data available |
3. Minimum turning circle radius without brakes (mm) | No data available |
4. Brake paddle play | 35-40 mm |
Steering
Specifications | Data |
---|---|
1. Mechanical | Available |
2. Power | Available |
3. Oil capacity (power steering) | 1.80 liters |
4. Oil capacity for mechanical steering (RANE) | 0.6 liter |
PTO
Specifications | Data |
---|---|
1. PTO HP @ Rated RPM | No data available |
2. PTO speeds-Standard | Available |
3. PTO speeds – Economy | 1000 PTO RPM with 21 spline |
4. PTO speeds – Reverse | Available |
5. PTO speeds – Multi speed | Available |
Hydraulics
Specifications | Data |
---|---|
1. Type | Live Auto depth and draft control |
2. Lift capacity | 1700 kg |
3. Additional | Easy lift lever |
Tires
Specifications | Data | Tyre pressure |
---|---|---|
1. Front tyre size | 6.00*16 (standard) 7.50*16 (optional) | 26 to 28 psi |
2. Rear tyre size | Standard 14.9*28 Optional 16.9*28 | 16 to 18 psi in haulage 14 to 16 psi in field |
OVREALL DIMENSIONS
Specifications | Data |
---|---|
1. Wheel base | 2145 mm |
2. Overall length | 3570 mm |
3. Overall width | 1825 mm |
4. Overall height | 2310 mm |
5. MIN. Ground clearance | 410 mm |
6. Weight of tractor | 2170 kg |
OTHERS
Specifications | Data |
---|---|
1. Battery | 12 V , 99 Ah |
2. Alternator | No data available |
3. Fuel tank capacity | 60 Litres |
Here are some features of instrument cluster of the tractor:
- Tachometer with 2400 maximum engine RPM.
- Fuel gauge.
- Hour meter.
- Ammeter.
- Temperature gauge.
- Engine oil pressure gauge.
- Indicator for engagement of turn indicator lights.
Oil type, capacities & duration
Parts | Amount | Type | Duration |
---|---|---|---|
Engine oil | 8 liter | 20W40 | 250 hours |
Air cleaner | 0.8 liters | 20W40 | 50 hours |
Steering (P.S.) | 1.80 liters | EP-90 | 1200 |
Transmission with dry brakes | NA | EP-80 | 1600 hours |
Transmission with wet brakes | NA | TRACTELF 2371 | 1600 hours |
Tractor has 22 greasing points which should be greased after 40 to 50 hours. Tractor has 10.5 liters coolant capacity and level of anti freeze should be according weather conditions.
Here is some information about tractor’s implement selection table:
Implement Selection for Swaraj 855 XM
Implement | Type | Recommended Gear |
---|---|---|
Cultivator | 11 tyne | 1st high |
Harrow trailed | 16 disc | 1st high |
Plough | 3 bottom disc | 2nd low and 3rd low |
M.B. Plough | 3 bottom plough | 2nd low & 3rd low |
Trailer load | 7 to 9 tons | According to situation |
Here is some information about tractor’s Periodic Maintenance Chart:
Periodic maintenance chart
Jobs | Hours | |||
---|---|---|---|---|
10 | First 50 | 150 | 300 | |
1. Clean whole tractor | ✓ | |||
2. Tight nuts & bolts | ✓ | |||
3. Greasing of all points | ✓ | |||
4. Check air pressure in tires | ✓ | |||
5. Check sources of leakages if any | ✓ | ✓ | ||
6. Check free play in clutch & brake paddle | ✓ | |||
7. Check & top up engine oil level | ✓ | |||
8. Check air cleaner oil level | ✓ | |||
9. Clean air pre cleaner bowl | ✓ | |||
10. Drain out water from filter | ✓ | |||
11. Check and adjust fan belt tension | ✓ | |||
12. Change engine oil & oil filter | ✓ | ✓ | ||
13. Check & adjust valve clearnance | ✓ | |||
14. Check & tight manifold leakage | ✓ | |||
15. If there is leakage in cylinder head valve then grind it | ||||
16. Removal of carbon form piston & cylinder head | ||||
17.Check & top up level of coolant | ✓ | |||
18. Clean radiator fins | ✓ | |||
19. Flush radiator | ||||
20. Clean fuel injection pump sediment bowl | ✓ | |||
21. Check & top up fuel pump oil level | ✓ | |||
22. Clean fuel tank & fuel cock | ✓ | |||
23. Change primary fuel filter | ✓ | |||
24. Change secondary fuel filter | ✓ | |||
25. Check injector & clean nozzle and adjust pressure | ||||
26. Do proper alignmet of front wheels | ✓ | |||
27. Grease front wheel’s bearings | ||||
28. Interchane front tires | ||||
29. Check & top up steering box oil (Mechanical) | ||||
30. Check & top up transmission oil | ✓ | |||
Clean hydraulic oil strainer | ||||
31. Change transmission oil filter | ✓ | ✓ | ||
32. Check electrolyte level in battery | ✓ | |||
33. Clean battery terminal | ✓ | |||
34. Check electrical connections & if loose then tight | ✓ | |||
Jobs | 10 | First 50 | 150 | 300 |
Jobs | Hours | |||
---|---|---|---|---|
550 | 800 | 1050 | ||
1. Change engine oil & oil filer | ✓ | ✓ | ✓ | |
2. Check & adjust valve clearance | ✓ | ✓ | ✓ | |
3. Check cylinder head valve leakage ( if leakage then grinding ) | ✓ | |||
4. Removal of carbon from piston & cylinder head | ✓ | |||
5. Flush radiator | ✓ | |||
6. Change primary fuel filter | ✓ | |||
7. Change secondary fuel filter | ✓ | |||
8. Service of nozzle and injector service | ✓ | |||
9. Grease front wheel bearings | ✓ | |||
10. Interchange fron tires | ✓ | |||
11. Check steering box oil level | ✓ | |||
12. Clean hydraulic oil strainer | ✓ | |||
13. Change transmission oil fitler | ✓ | ✓ | ✓ | |
14. Check electrical system | ✓ | |||
15. Change transmission oil | After every 1600 hours | |||
Jobs | 550 | 800 | 1050 |
More Models: