John Deere 5050E tractor has 3 cylinder turbocharged liquid cooled engine with 2939 CC displacement which can produce about 50 HP at 2400 engine rated RPM. Tractor has dual clutch with 9F + 3R transmission. Tractor has 1800 kg weight lifting capacity with 3 point linkage system. Tractor has 68 litres fuel tank capacity. Here are some more details of tractor:
Price
Price of John Deere 5050 E tractor starts from Rs 8,55,000 and goes up to Rs 9,20,000 which is due to different area dealerships and some other factors.
Engine
| Specifications | Data |
|---|---|
| 1. Engine Make | John Deere |
| 2. Engine Type |
|
| 3. Max Torque | No data available |
| 4. HP | 50 |
| 5. Bore*Stroke (MM) | 106.5*110 mm |
| 6. Displacement | 2939.71 CC |
| 7. Engine rated RPM | 2400 |
| 8. Pump | Inline Bosch |
| 9. Max engine RPM in tachometer | 3000 |
| 10. SFC | No data available |
| 11. Idle RPM | 850 +- 50 |
| 12. Max. idle RPM | 2600 +-50 |
| 13. Compression ratio | 18.7:1 |
| 14. Working RPM range | 1400 to 2400 |
| 15. Fuel injections timing | 11° BTDC (fix injection timing) |
Transmission
| Specifications | Data |
|---|---|
| 1. Clutch type & size | Dual (size not available) |
| 2. Transmission | 9F (standard) and 12F (for creeper) + 3R |
| 3. Clutch paddle free play | 20-25 mm |
| 4. Transmission type | Collarshift (standard) TSS (optional) |
Here are transmission speed chart at engine rated RPM:
Gear speed for V1 and V2
| Gears | Variant 1 | Variant 2 |
|---|---|---|
| A1 | 2.1 | 2.2 |
| A2 | 3.1 | 3.9 |
| A3 | 4.6 | 4.7 |
| B1 | 6.0 | 5.1 |
| B2 | 8.6 | 9.3 |
| B3 | 13.0 | 11.1 |
| C1 | 13.8 | 14.0 |
| C2 | 20.0 | 25.6 |
| C3 | 30.1 | 30.5 |
| A-R | 3.6 | 3.6 |
| B-R | 10.0 | 8.5 |
| C-R | 23.3 | 23.4 |
Gear speeds for V3, V4 & V5
| Gears | Variant 5 | Variant 3 | Variant 4 |
|---|---|---|---|
| A1 | 2.2 | 2.3 | 2.2 |
| A2 | 3.2 | 4.1 | 3.2 |
| A3 | 4.9 | 4.9 | 4.9 |
| B1 | 6.3 | 5.3 | 5.3 |
| B2 | 9.0 | 9.7 | 7.6 |
| B3 | 13.6 | 11.6 | 11.5 |
| C1 | 14.5 | 14.7 | 14.5 |
| C2 | 20.9 | 26.8 | 20.9 |
| C3 | 31.5 | 31.9 | 31.4 |
| A-R | 3.8 | 3.8 | 3.6 |
| B-R | 10.5 | 8.9 | 8.9 |
| C-R | 24.4 | 24.5 | 24.3 |
Brakes
| Specifications | Data |
|---|---|
| 1. Type | Hydraulic Wet disc Brakes |
| 2. Minimum turning radius with brakes | 3150 mm (for 2WD) 3150 mm (for 4 WD) |
| 3. Minimum turning radius without brakes | 3630 mm (for 2WD) 3630 mm (for 4 WD) |
| 4. Brake paddle free play | 20 to 30 mm |
Steering
| Specifications | Data |
|---|---|
| 1. Mechanical | Not available |
| 2. Power | Available (standard) |
| 3. Oil capacity (power steering) | There is no separate oil tank for power steering oil. |
PTO
| Specifications | Data |
|---|---|
| 1. PTO HP @ Rated RPM | 42 hp |
| 2. PTO speeds-Standard | Available (540 PTO RPM at 2376 engine RPM) |
| 3. PTO speeds – Economy | 540 PTO RPM at 1705 engine RPM |
| 4. PTO speeds – Reverse | Available (600 at 2376 ERPM) |
| 5. PTO speeds – Ground speed | Not available |
Hydraulics
| Specifications | Data |
|---|---|
| 1. Type | Live Auto depth and draft control |
| 2. Lift capacity | 1800 kg with three point linkage system. |
Tyres & pressure according to conditions
| Tyre | Pressure without heavy load | Pressure with ballast or heavy equipment |
|---|---|---|
| 6.00*16 7.50*16 | 23 psi 20 psi | 40 psi 40 psi |
| 14.9*28 | 12 psi | 20 psi |
| 16.9*28 | 14 psi (in field also) | 19 psi (on road also) |
Overall dimensions
| Measurements | For 6.0*16 and 14.9*28 tyres | For 7.5*16 and 16.9*28 tyres |
|---|---|---|
| 1. Wheel base | 2050 mm | 2050 mm |
| 2. Overall length | 3500 mm | 3535 mm |
| 3. Overall width | 1790 mm | 1850 mm |
| 4. Height up to exhaust pipe | 2320 mm | 2350 mm |
| 5. Min. ground clearance | 420 mm | 435 mm |
| 6. Total weight | 1920 kg | 2100 kg |
Others
| Specifications | Data |
|---|---|
| 1. Battery | 12 V, 88 Ah |
| 2. Alternator | 43 Amps. |
| 3. Fuel tank capacity | 68 Litres |
It is very important to use recommended lubrication oil type and amount for tractor’s long life and better performance and to better understand about it here are some more details in brief:
Oil & Lubrications
| Part | Amount | Type |
|---|---|---|
| Engine | 8.5 litres | SAE 15W-40 |
| Transmission & Hydraulics | 38 litres for 2WD | HY-GARD |
| Coolant | 9.5 litres | John Deere COOL-GARD II |
| Grease | As required | John Deere GREASE-GARD |
NOTE: Type and grade lubrication oil may change with environmental conditions and temperature and better to understand about you should visit to nearest authorized John Deere service center.
Here are the details about tractor’s instrument cluster:
- Engine tachometer with 3000 maximum engine RPM.
- Reverse PTO engagement indicator.
- PTO engagement indicator.
- Transmission neutral indicator.
- Digital hour meter.
- High beam indicator.
- Turn indicator lights.
- Air cleaner clog indicator.
- System charging indicator.
- Engine oil pressure indicator.
- Fuel gauge.
- Engine coolant temperature indicator.
Here are some fuel saving tips for the tractor which should be followed while operating tractor:
- There should be proper air pressure in tyres according to condition (you can check tyre table for that).
- There should be proper lubrication of all greasing points.
- Use proper ballasting to wheel slippage.
- Follow proper periodic maintenance procedure.
- Always use company recommended lubrication oil type.
- Always drive tractor in recommended engine RPM range.
- Always keep air cleaner element clean.
- Always inspect turbo hoses and water in fuel filters before starting the tractor.
- Don’t overload engine.
- Don’t rev engine at no load.
- Valve clearance should be perfect.
- Always do proper maintenance of injector pump and nozzles according to maintenance chart.
- Always select proper implement for tractor.
- Don’t rest foot on clutch paddle while driving tractor.
- Always drive tractor in recommended gear according to situation.
There is no data available for implement selection for the tractor.
After 1 year of using tractor:
- Change engine oil and oil filter.
- Change air cleaner primary element.
- Check friction throttle lever.
After purchasing new tractor there are some jobs which should be done when first given hours are completed:
- After first 100 hours:
- Change engine oil and oil filter.
- Change transmission oil filter.
- Follow other service maintenance points also.
- After first 600 hours:
- Change water separator bowl.
- After first 1100 hours:
- Change transmission-hydraulic oil and oil filter.
For other general periodic maintenance, here is the information about all rest of the points:
Periodic maintenance chart
| Jobs | ||||
|---|---|---|---|---|
| Every 10 | Every 50 | Every 250 | Every 500 | |
| Drain out water from water separator | ✓ | |||
| Check & top up engine oil level | ✓ | |||
| Check coolant level | ✓ | |||
| Lubricate tyre rod ball points | ✓ | |||
| Lubricate steering spindle | ✓ | |||
| Lubricate front axle pivot pins | ✓ | |||
| Lubricate rear bearings | ✓ | |||
| Check and top up transmission oil level | ✓ | |||
| Check and top up front axle oil level | ✓ | |||
| Check battery terminals | ✓ | |||
| Check and adjust tyre pressure | ✓ | |||
| Lubricate front axle pivot pins | ✓ | |||
| Lubricate steering spindles | ✓ | |||
| Check and tight all nuts & bolts with torque | ✓ | |||
| Service the air cleaner | ✓ | |||
| Change engine oil and oil filter | ✓ | |||
| Clean battery terminals | ✓ | |||
| Inspect fan belt | ✓ | |||
| Check neutral start system | ✓ | |||
| Check & adjust free play clutch & brake paddle | ✓ | |||
| Change filter inserts | ✓ | |||
| Change fuel filters (for rotary fuel pump) | ✓ | |||
| Change transmission oil and oil filter | ✓ | |||
| Jobs | |||
|---|---|---|---|
| Every 600 | Every 1250 | Every 2000 | |
| Change 4 WD housing oil | ✓ | ||
| Clean engine crankcase vent tube | ✓ | ||
| Lubricate front wheel bearings | ✓ | ||
| Check & tight all clamps | ✓ | ||
| Check source of leakage in cooling system | ✓ | ||
| Lubricate rear axle bearings | ✓ | ||
| Check engine idle speed | ✓ | ||
| Check fuel injectors | ✓ | ||
| Check & adjust valve clearance | ✓ | ||
| Check front axle pivot pin | ✓ | ||
| Change transmission oil & oil filter | ✓ | ||
| Change water separator bowl | ✓ | ||
| Clean hydraulic pick up screen | ✓ | ||
| Flush cooling system | ✓ | ||
For troubleshooting visit John Deere 5310 tractor because problem and their remedies are same for both the tractors.
More models:
John Deere 5310 (2100 engine rated RPM).
John Deere 5310 (2400 engine rated RPM).