New Holland 5620 CRDI TX plus full specifications & price

New Holland 5620 CRDI tractor is launched by New Holland according to change in pollution norms. Price of New Holland 5620 CRDI 2 WD variant is 12.5 lakhs to 13.10 lakhs and price for 4WD variant is 14 lakh to 14.5 lakh. Tractor has 3 cylinder turbocharged with intercooler engine which can produce 65 HP at 2300 engine rated RPM, engine has 2931 cubic centimeter (CC) displacement. Tractor can produce maximum torque of 291 Nm at 1400 engine RPM. Tractor has different modes which provides different power output which can help in saving fuel. Tractor has double clutch with 3 types of transmission option. Tractor has 2000 kg weight lifting capacity with assist ram. Here are full specifications of tractor:

Common Rail Direct Injection (CRDI) system is used in engine which makes engine more silent and consumes low fuel, there different modes are introduced for this 3 cylinder engine. Let’s take a close look to engine:

Engine

Radiator cap pressure is 13psi which allow hot gases to escape at this pressure and whenever there is any fault in cap replace cap with same pressure if there will be cap with high pressure then it will cause overheating of engine.

Type & amount of engine oil: “ENGINE OIL SAE 10W-40 CK-4 SEMI-SYNTHETIC” 6.9 liters engine is used and also company recommended. To know about interval of changing engine oil check periodic maintenance chart. In radiator capacity of coolant is 11 liters and coolant type is EXTENDED LIFE OAT COOLANT/ANTIFREEZE.

As already discussed that this a turbocharged tractor and that is why take care of following points:

• After starting tractor leave it idle RPM for 60 seconds.
• When tractor is not in use then cover exhaust pipe because air flow can rotate turbo fan which may cause damage.

Transmission

Company has provided vast options in transmission which provides farmers a large number of variety for different type of applications, there are basically three types of transmission options which are able to provide almost all type of gear speeds for each & every type of application.

In case of transmission “UTTO SAE 20W-30, API GL-4. ISO VG 46/68” type oil is used for lubrication and oil amount for 2 wheel drive variant is 37 liters while oil amount for 4 wheel drive variant is 40 liters and same type of oil is used in front axle system and oil amount for front axle is 5 liters and oil amount for each side hub of 4WD axle is 1.25 liters.

Now let’s take a close look to gear speeds so that you can better understand that which type of transmission you should select:

Gear speeds for 8F + 2R transmission

Gear speeds for 12F + 3R creeper transmission

Gear speeds for 12F + 3R UG transmission

Brakes

Steering

PTO

As we have already discussed that tractor has 3 types transmission options that’s why there is 3 types of different ground speeds in tractor due to change in transmission. Now take a close look to PTO ground speed:

PTO speed for 8F+2R transmission

PTO speed for 12F+3R creeper transmission

PTO speed for 12F+3R UG transmission

Reverse PTO speed for 12F+3R UG transmission

Hydraulics

There are many features in hydraulic system of this tractor:

• Height limiter: it sets the lower height from land which operator desires to have in field and Lift-O-Matic lever will work on this selected height.
• Speed controller: This nob controls the working time of rear links i.e. speed to go down and then come up (you can set rear link to go slow or fast down and then up).
• Sensitivity controller: This nob controls the sensing time of top link in field.
• Top-off valve: To enable it set down rear links then tight it full and when you will pull up hydraulic lift levers then tractor will start to supply oil to external hydraulic cylinder which mainly used for tipping trailer.

Tyres

Overall dimensions

Others

Here is the detail about tractor’s instrument cluster:

• High beam indicator (blue color light).
• Low fuel level warning indicator (amber color light).
• Water in fuel warning indicator (amber color light).
• Air cleaner clog indicator (amber color light).
• Engine fault indicator (amber color light).
• Low engine oil pressure indicator (red color light).
• Light on indicator (green color light).
• Turn indicator (green color light).
• Engine stop indicator (red color light).
• Battery charging indicator (red color light).
• Trailer turn indicator (green color light).
• Parking brake indicator (red color light).
• Glow plug indicator (amber color light).
• Engine coolant temperature gauge.
• Transmission neutral indicator (green color light).
• Tachometer with 2800 maximum engine RPM.
• Fuel level gauge.
• Digital hour meter.
• Digital trip meter.
• Trip setting button.

There are 3 modes in tractor:

• Power mode (Power mode provides average torque and power).
• ECO mode (ECO mode is default mode which provides maximum torque and power according to engine capacity).
• ECO+ mode (This mode provides suitable torque and power).

It is always recommended to drive tractor under load limit because if there will be extra load then it may be the reason of accident and also not good for the tractor i.e. there will be overloading of engine which results high fuel consumption and decreases life of engine and better understand about it here is a table:

Water ballasting

To wheel slippage firstly you should add extra iron weight rings each of 50 kg weight (2 to 3) rear wheel and 30 kg weight plates on front end weight carrier and after this there is wheel slippage then you should choose water ballasting and better understand about it here is some data:

While taking care proper safety check of tractor it is very important to tight wheel and hub nuts and bolts with perfect torque amount and here we have provided unique information about it:

Our tractor gives maximum working efficiency when we select perfect implement for the tractor, that’s why here is some information for implement selection for the tractor:

Implement selection for New Holland 5620 CRDI

As we have already discussed that this tractor has CRDI and that’s why there are so many electrical sensors in it and whenever there will be anything wrong with these sensors then there will be a fault code instrument cluster and here is some data to understand about it deeply:

Fault codes identifications for New Holland 5620 CRDI:

Here we have covered all the important points of periodic maintenance of tractor:

Periodic Maintenance chart

More models:

• New Holland 5630 CRDI TX Plus specifications
• New Holland 5620 TX Plus full specification & gear speeds
• New Holland 3630 TX Special Edition specifications
• Swaraj 855 fe full specifications, maintenance chart
• John Deere 5050E tractor full specifications and gear speeds