New Holland 5620 TX Plus full specification & gear speeds

New Holland 5620 TX tractor has 3 cylinder turbo charged liquid cooled engine with 2931 CC displacement which can produce about 65 HP at 2300 engine rated RPM. Tractor has double clutch with 3 types of transmission options. Tractor has 2000 kg weight lifting capacity with asist ram. This tractor was launched in year 2020 to fill the gap between 55 hp and 75 hp tractor from New Holland. Tractor is available in both 2WD & 4WD variant according to demand of farmers. This is about to discontinue because company has launched its new model New Holland 5620 CRDI TX plus according to updates in pollution norms. Here are full specifications of tractor:

Tractor has 3 cylinder IVECO engine which has turbocharger, intercooler and rotary type fuel injection pump. Tractor has 24 types of different sensing options which can give you best performance in almost in all types of soils. As already discussed this tractor has turbocharger that’s why it has dry type air cleaner with primary & secondary paper element. Tractor has side shifting gear levers and operator’s seat with arm rest which provides operator a comfortable riding experience.

Engine

Specifications	Data
1. Engine Make	FPT
2. Engine model	FPT S8000 (8035.45.724)
3. Engine Type	3 Cylinder 4 Stroke Turbo Charged Liquid Cooled Direct Injection Diesel Engine
4. Max Torque	270 Nm (engine RPM not available)
5.HP	65 hp
6. Bore*Stroke (MM)	104*115 mm
7. Displacement	2931 cc
8. Engine rated RPM	2300
9. Pump	Rotary Bosch
10. Max engine RPM in tachometer	2800
11. SFC	194 gram per hp per hour
12. Intake & exhaust valve clearance	0.30 mm in cold
13. Radiator cap pressure	0.88 bar (12.76 psi)

As we have already discussed that tractor has double clutch (which provides more working options). Company has provided 3 types of transmission options for farmers which make tractor to work in extreme hard conditions. In case of hard soil when operator needs very low speed to cultivate land, tractor’s 12F+3R creeper transmission is very useful which provides tractor maximum pulling power.

Transmission

Specifications	Data
1. Clutch type & size	Double clutch with independent PTO clutch lever with 280 mm dianeter each
2. Gearbox	Fully constant mesh and Partial synchromesh 8F+2R 12F+3R Creeper 12F+3R UG
3. Free play in paddle	35 to 40 mm

Gear speeds for 8F + 2R transmission

Gear speed in kmph with 16.9*30 rear tyre
Gears	Engine RPM
Gears	1800	2000	2100	2300
L1	2.20	2.44	2.57	2.81
L2	3.23	3.59	3.77	4.13
L3	4.73	5.26	5.52	6.05
L4	6.52	7.24	7.61	8.33
H1	7.90	8.78	9.22	10.1
H2	11.64	12.93	13.58	14.87
H3	17.05	18.94	19.89	21.78
H4	23.45	26.06	27.36	29.97
LR	3.09	3.43	3.61	3.95
HR	11.11	12.35	12.97	14.2

Gear speeds for 12F + 3R Creeper transmission

Gear speed in kmph with 16.9*30 rear tyre
Gears	Engine RPM
Gears	1800	2000	2100	2300
C1	0.71	0.79	0.83	0.91
C2	1.05	1.17	1.22	1.34
C3	1.53	1.70	1.79	1.96
C4	2.11	2.35	2.47	2.7
L1	2.20	2.44	2.57	2.81
L2	3.23	3.59	3.77	4.13
L3	4.73	5.26	5.52	6.05
L4	6.52	7.24	7.61	8.33
H1	7.90	8.78	9.22	10.1
H2	11.64	12.93	13.58	14.87
H3	17.05	18.94	19.89	21.78
H4	23.45	26.06	27.36	29.97
CR	1.00	1.11	1.17	1.28
LR	3.09	3.43	3.61	3.95
HR	11.11	12.35	12.97	14.2

Gear speeds for 12F + 3R UG transmission

Gear speed in kmph with 16.9*30 rear tyre
Gears	Engine RPM
Gears	1800	2000	2100	2300
L1	1.48	1.64	1.73	1.89
L2	2.18	2.42	2.54	2.78
L3	3.19	3.55	3.73	4.08
L4	4.39	4.88	5.12	5.61
M1	4.64	5.16	5.41	5.93
M2	6.83	7.59	7.97	8.73
M3	10.00	11.11	11.67	12.78
M4	13.76	15.29	16.05	17.58
H1	7.90	8.78	9.22	10.1
H2	11.64	12.93	13.58	14.87
H3	17.05	18.94	19.89	21.78
H4	23.45	26.06	27.36	29.97
LR	2.10	2.33	2.45	2.68
MR	6.57	7.30	7.67	8.4
HR	11.21	12.45	13.07	14.32

Tractor has oil immersed brakes with 4 discs each side which can stop tractor very easily with very heavy load and provides best safety.

Brakes

Specifications	Data
1. Type	Oil Immersed Disc Brakes (4 disc each side)
2. Minimum turning circle diameter with brakes	3250 mm in 2 WD 5100 mm in 4 WD
3. Minimum turning circle diameter without brakes	3650 mm in 2 WD 6750 mm in 4 WD
4. Brake paddle free play	50-55 mm

Steering

Specifications	Data
1. Mechanical	Not available
2. Mechanical steering oil	Not available
2. Power	Available
3. Power steering oil capacity	2.7 litres

Tractor has 57 hp PTO hp which can drive heavy implement very easily such straw reaper & rotavator and apart form that there is an additional feature i.e. ground speed PTO which is very helpful while operating an implement which needs high PTO RPM but has not so much load, in that case ground speed PTO provides high PTO RPM at low engine RPM which saves fuel.

PTO

Specifications	Data
1. PTO HP @ Rated RPM	57
2. PTO speeds-Standard	Available 540 PTO RPM @ 1967 ERPM
3. PTO speeds – Economy	Not available
4. PTO speeds – Reverse	No data available
5. PTO speeds – Ground speed	Available

Ground PTO speeds for 8F + 2R transmission

Gears	PTO rounds
L1	152.51
L2	224.57
L3	328.84
L4	452.60
H1	549.02
H2	808.46
H3	1183.82
H4	1629.35
LR	214.46
HR	772.06

Ground PTO speeds for 12F + 3R Creeper transmission

Gears	PTO rounds
C1	49.38
C2	72.72
C3	106.48
C4	146.56
L1	152.51
L2	224.57
L3	328.84
L4	452.60
H1	549.02
H2	808.46
H3	1183.82
H4	1629.35
CR	69.44
LR	214.46
HR	772.06

Ground PTO speeds for 12F + 3R UG transmission

Gears	PTO rounds
L1	103
L2	151
L3	222
L4	286
M1	322
M2	474
M3	695
M4	897
H1	549
H2	808
H3	1184
H4	1529
LR	146
MR	457
HR	778

NOTE; All these PTO speeds are at 2300 engine rated RPM only. PTO speeds will be different at RPM other than this.

Hydraulics

Specifications	Data
1. Type	Live Auto depth and draft control
2. Lift capacity	2000 kg with assist ram
3. Additional	Lift-O-Matic option for uniform depth after turn in field with implement

Tires

Specifications	Data	Air pressure
1. Front tyre size	7.5016 11.224	28 psi in field and haulage
2. Rear tyre size	16.9*30	12 psi in field 20 psi in haulage

Overall Dimensions

Specifications	2 WD	4 WD
1. Wheel base	2050 mm	2040 mm
2. Overall length	3515 mm	3540 mm
3. Overall width	1965 mm	1985 mm
4. Overall height (up to top of exhaust)	2375 mm	2420 mm
5. Ground clearance (under front axle)	495 mm	440 mm
6. Weight of tractor (without ballast)	2460 kg	2700 kg

Others

Specifications	Data
1. Battery	12 V 100 Ah with 55 A Alternator 110 Ah with 90 A Alternator
2. Alternator	14 V & 55 Amps. (default) and 90 Amps. (optional)
3. Fuel tank capacity	62 Litres
4. Fan belt tension	19mm to 22mm

Here are the details about lubrication oil type and grease for the tractor’s long life and better performance:

Oil & lubrications

Engine oil	7.4 litres	SAE 15W-40 API CI-4 ACEA E7	ENGINE OIL SUPER SAE 15W-40 CI-4
Transmission & hydraulics	29 lit. (for 2WD) 34 lit.(for 4WD)	SAE 20W-30, API GL-4, ISO VG-46, ISO VG-68	UTTO SAE 20W-30, API GL 4, ISO VG 46/68
Steering oil (hydro)	2.7 litres	SAE 20W-30, API GL-4, ISO VG-46, ISO VG-68	UTTO SAE 20W-30, API GL 4, ISO VG 46/68
Coolant	10.8 litres	Heavy duty IAT coolant, ASTM D6210	IAT Coolant 11-Classic
Rear Axle	15.4 litres	SAE 85W-140 API GL-5 EP	HYPOID GEAR OIL EP SAE 85W-140
4WD front axle differential	5.5 litres	SAE 20W-30, API GL-4, ISO VG-46, ISO VG-68	UTTO SAE 20W-30, API GL 4, ISO VG 46/68
4WD front axle final drive hub	1.25 litres	SAE 20W-30, API GL-4, ISO VG-46, ISO VG-68	UTTO SAE 20W-30, API GL 4, ISO VG 46/68
Grease for clutch release bearing	As required	NLGI 2, Li soap, moly disulfide grease	MULTI PURPOSE MOLY GREASE EP/ AW/ NLGI 2
Grease for lubrication	As required	NLGI 2 Li soap grease	MULTI PURPOSE GREASE EP/ AW/ NLGI 2

Here are the details about water ballasting and weight mounting and methods and precautions about it:

Water ballasting

To avoid wheel slippage operator can mount extra weight on tractor i.e. for rear wheel iron ring of 55 kg can be used and for front end 30 kg iron plates can be used. But before mounting these weights it is very important to tight these rings with company recommended torque and to better understand about it here is a table for it:

Parts	Torque amount in Nm
Front disc with hub bolts for 2WD	320 Nm
Front disc with hub bolts for 4WD	220 Nm
Rear weight to rear disc	150 Nm
Rear disc to hub bolts	220 Nm
Rear disc to rim nuts	220 Nm

Water ballasting is also a good option to add extra weight on tractor and to avoid wheel slippage but in this method there are two thing which are:

In case of extremely cold conditions (below freezing point) mix 600 gram of calcium chloride with 1 liter of normal water and then fill tube with this solution which decrease the freezing point of water.
There only 75% water and 25% air in the tube which is the perfect balance for ballasting which provides perfect grip to tyres.

Tyre size	Amount of water in kg
16.9*30	220 kg

In extreme cold condition it is very important to check level of anti freeze in radiator to avoid freezing of water in radiator. The amount anti freeze varies with change in temperature:

Temperature	Volume of anti freeze
-5°C	25%
-5°C to -18°C	30%
-18°C to -25°C	40%
-25°C to -37°C	50%

To get best performance from the tractor it is very important to select correct implement for the tractor and to better understand about it here is a table of implement selection:

Implement selection

Implement	Type	Recommended gears
Cultivator
Rigid tine	15, 17 & 19 tines	L3, L4. H1
Spring loaded	15, 17 & 19 tines	L3, L4, H1
Harrow
Trailed disc harrow	20 to 24 Discs	L3, L4, H1
Plough
Disc plough	3-4 discs	L2, L3, L4
Mould board plough	2-3 furrow	L2, L3, L4
Chisel plough	7 to 9 tines	L3, L4
Rotavator
Rotavator	7.5 feet	L2, L3

New Holland 5620 TX Plus

Maintenance chart

Jobs	Hours
Jobs	10 or daily	First 50	Every 50
Check engine oil level	✓
Check radiator coolant level	✓
Drain water from water separator	✓
Check hydraulic steering oil level	✓	✓
Change engine oil		✓
Change engine oil filter		✓
Change hydraulic oil filter		✓
Change fuel filters		✓
Check & top up 4 WD axle & hub oil level		✓
Air cleaner element cleaning with air pressure		✓	✓
Check & adjust free play clutch & brake paddles			✓
Tight nuts & bolts of hub with torque			✓
Check tyre pressure			✓
Check fan & alternator belt tension			✓
Lubrication of all greasing points			✓
Check & top up transmission & hydraulic fluid level			✓
Check free play in PTO clutch lever			✓
Check and top up 4WD axle oil level			✓
Jobs	10 hours or daily	First 50	Every 50
Jobs	Hours

Jobs	Hours
Jobs	First 300	Every 300	Every 600	Every 1200
Change 4 WD differential & hub oil	✓
Change fuel filters		✓		✓
Clean fuel feed pump strainer		✓
Check & top up hydraulic steering oil level		✓
Change engine oil		✓
Change engine oil filter		✓
Check & top up transmission/hydraulic oil level		✓
Change hydraulic oil filter		✓
Check & adjust valve clearance			✓
Change fuel filters			✓
Clean transmission breather			✓
Clean front wheel bearing & lubricate them			✓
Change transmission/hydraulic oil				✓
Change steering oil (Hydraulic)				✓
Change radiator fluid				✓
Check and adjust valve clearance				✓
Change front 4 WD axle & hub oil				✓
Change final drive oil				✓
Cleaning of fuel tank				✓
Jobs	First 300	Every 300	Every 600	Every 1200
Jobs	Hour

NOTE: Air cleaner outer element should be changed after 3 times of cleaning or after 900 hours while inner element should be changed after 2700 hours or 3 replacement of outer element. But in case of dusty environmental conditions this time period can be earlier.

Troubleshooting

Here are the some basic and advance problems which may happen with tractor after a long time of use or lack maintenance and their possible reasons:

Engine is not starting or starting with difficulty:
- Wrong starting procedure.
- Low fuel level.
- Tractor is in gear.
- Air trapped in fuel system.
- Fuel filters are clogged.
- Fault in fuel pump and injector nozzles.
Improper running of engine:
- Quality of diesel is not good.
- Blockage in fuel filters.
- Blockage in fuel injectors.
Engine is not achieving its maximum power:
- Overloading of engine.
- Air cleaner element is clogged.
- Fuel filters are clogged.
- Fault in turbocharger and its connections.
- Wrong adjustment of tappet clearance.
- Engine overheating.
- Fault in injectors.
- Throttle control lever is not working properly.
Low engine operating temperature problem:
- Fault in thermostat.
- Fault in temperature gauge.
Low engine oil pressure warning:
- Level of engine oil is low.
- Grade of engine oil is correct.
- Fault in oil pump.
High engine oil consumption:
- Level of engine oil is too high.
- Oil leakage.
- Wrong grade of engine oil.
Engine over heating:
- Fault in radiator cap.
- Radiator fins are clogged.
- Engine overloading.
- Coolant level is low.
- Fault in fan belt.
- Internal blockage in cooling system.
- Hose leakage.
- Fault in thermostat.
- Fault in temperature gauge.
- Advance fuel injection timing.
High fuel consumption:
- Wrong ballasting.
- Air cleaner element is dirty.
- Adjustment of valve clearance is wrong.
- Selection of implement is wrong.
- Overloading of engine.
- Tyre pressure is not correct.
- Engine operating temperature is too low.
- Braking system is jammed.
- Fault in injector system.

For more information you can Contact Us on our official page or if there is any other problem than then you should visit to nearest authorized service center.

More models:

New Holland 3600-2 TX full specification & Gear speed

New Holland 5620 CRDI TX plus full specifications & price

New Holland 3630 TX Special Edition specifications

New Holland 5630 TX Plus CRDI specifications