John Deere 5045 D full specification: tractor has naturally aspirated liquid cooled engine with 2939 CC displacement which can produce 45 hp at 2100 engine rated RPM. Tractor can produce 179 Nm torque at 1200 engine RPM. Tractor has 1400 kg lift capacity with 3 points linkage system for better sensing of implement in field. Tractor has 60 liters fuel tank capacity. Here are full specifications of tractor:
Price
Price of the John Deere tractor starts from Rs 7,58,000 and goes up to Rs 8,29,000 which may vary with different area dealerships.
Engine
| Specifications | Data |
|---|---|
| 1. Engine Make | John Deere |
| 2. Engine Type |
|
| 3. Max Torque | 179 Nm torque at 1200 rpm |
| 4. HP | 45 hp |
| 5. Bore*Stroke (MM) | 106.5*110 mm |
| 6. Displacement | 2939.71 CC |
| 7. Engine rated RPM | 2100 |
| 8. Pump | Inline Bosch |
| 9. Max engine RPM in tachometer | 3000 |
| 10. SFC | No data available |
| 11. Idle RPM | 850 +- 50 |
| 12. Max. idle RPM | 2300 +-50 |
| 13. Compression ratio | 18.5:1 |
| 14. Working RPM range | 1400 to 2100 |
| 15. Fuel injections timing | 11° BTDC |
Transmission
| Specifications | Data |
|---|---|
| 1. Clutch type & size | Single & dual (size not available) |
| 2. Transmission | Collar shift with 8F + 4R |
| 3. Clutch paddle free play | 20-25 mm |
Gear speed with 13.6*28 tyres
| Gears | Speed in kmph |
|---|---|
| A1 | 2.84 |
| A2 | 4.18 |
| A3 | 6.51 |
| A4 | 10.29 |
| B1 | 8.59 |
| B2 | 12.62 |
| B3 | 19.68 |
| B4 | 31.07 |
| R1 | 3.74 |
| R2 | 5.49 |
| R3 | 8.56 |
| R4 | 13.52 |
Brakes
| Specifications | Data |
|---|---|
| 1. Type | Mechanical Wet disc Brakes |
| 2. Minimum turning radius with brakes | 2.9 meters (in 2WD) 3 meters (in 4WD) |
| 3. Minimum turning radius without brakes | 3.2 meters (in 2WD) 3.2 meters (in 4WD) |
| 4. Brake paddle free play | 20 to 30 mm |
Steering
| Specifications | Data |
|---|---|
| 1. Mechanical | Not available |
| 2. Power | Available (standard) |
| 3. Oil capacity (power steering) | There is no separate oil tank for power steering oil. |
PTO
| Specifications | Data |
|---|---|
| 1. PTO HP @ Rated RPM | 37.6 hp |
| 2. PTO speeds-Standard | Available (540 PTO RPM at 2050 engine RPM) |
| 3. PTO speeds – Economy | 540 PTO RPM at 1600 engine RPM |
| 4. PTO speeds – Reverse | Available (228 at 1200 ERPM) |
| 5. PTO speeds – Ground speed | Not available |
Hydraulics
| Specifications | Data |
|---|---|
| 1. Type | Live Auto depth and draft control |
| 2. Lift capacity | 1400 kg with three point linkage system. |
Tyre in 2 WD
| Tyre | Without heavy load | With ballast or heavy equipment |
|---|---|---|
| 6.00*16 7.50*16 | 23 psi 20 psi | 40 psi 40 psi |
| 13.6*28 14.9*28 | 13 psi (in field also) 12 psi (in field also) | 18 psi (on road also) 20 psi (on road also) |
Tyre in 4 WD
| Tyre | Without heavy load | With ballast or heavy equipment |
|---|---|---|
| 8.00*18 | 20 psi | 35 psi |
| 13.6*28 14.9*28 | 13 psi (in field also) 12 psi (in field also) | 18 psi (on road also) 20 psi (on road also) |
Overall dimensions
| Specifications | Data (2WD) | Data (4WD) |
|---|---|---|
| 1. Wheel base | 1950 mm | 1950 mm |
| 2. Overall length | 3350 mm | 3350 mm |
| 3. Overall width | 1775 mm | 1775 mm |
| 4. Overall height (up to exhaust pipe) | 2220 mm | 2220 mm |
| 5. MIN. Ground clearance | 460 mm | 365 mm |
| 6. Weight of tractor | 1810 kg | 1975 kg |
Others
| Specifications | Data |
|---|---|
| 1. Battery | 12 V, 88 Ah |
| 2. Alternator | 42 Amps. |
| 3. Fuel tank capacity | 60 Litres |
Fuel saving tips:
- There should be no leakage in fuel lines.
- There should be proper air pressure in tyres according to size and condition (you can check table given above for tyre pressure).
- Thermostat should work properly (CAUTION: Don’t remove thermostat because after removal of this valve temperature for proper working of engine will be maintained).
- There should be proper free play clutch, brake paddle and alternator/fan belt.
- There should be proper lubrication of front spindles and other greasing points.
- Always drive tractor on recommended load.
- Always use company recommended oil filters and follow maintenance schedule for servicing of fuel injection system.
- Follow proper service maintenance schedule for servicing of tractor and pump and nozzles also.
- Always drive tractor on recommended RPMs.
- Read user manual before operating tractor.
Precautions:
- While servicing battery there should be not fire or spark near battery such as candle because it cause explosion in battery and serious injury.
- Don’t fill coolant when engine is hot (let it cool down only then fill coolant).
- Don’t use any metallic object to test battery’s life instead always use voltmeter or multimeter.
- Don’t mix petrol in diesel to increase performance because it can damage pump and nozzles internally.
- While using differential lock front wheels should be in a straight direction.
- Use 4 wheel drive system only there is strong need i.e. using 4 wheel drive system on road can cause damage in some internal parts.
Here is details about lubrication oil type and oil amount which is very helpful during periodic service schedule:
Oil & Lubrications
| Part | Amount | Type |
|---|---|---|
| Engine | 6.5 litres | SAE 15W-40 |
| Transmission & Hydraulics | 32 litres for grease axle 30 litres for oil axle | BIO-HY-GARD |
| Coolant | 9.8 litres | John Deere COOL-GARD II |
| Grease | As required | John Deere GREASE-GARD |
If oil in any part is below than recommended marks then that should be up to recommended mark.
Type of engine oil may change according to weather conditions and for that you should contact to nearest authorized service provider.
Instrument cluster
- Tachometer with 3000 maximum engine RPM.
- Air cleaner clog indicator.
- High beam indicator.
- System charging indicator.
- Engine oil pressure gauge.
- Hour meter.
- Engine coolant temperature indicator.
- Turn indicator lights indicator.
- Fuel gauge.
- Reverse PTO indicator.
Weight capacities
To maintain proper safety of tractor it is very important to drive tractor below maximum weight capacity of tyres because mounting extra weights than recommended will result in high fuel consumption and damage in tyres and other parts of tractors. Here is table of maximum weight capacity according to tyre size which is not only for this tractor but for all the John Deere tractors in India:
| Tyre size | Ply rating | Weight capacity (kg) |
|---|---|---|
| 6.00*16 | 8 | 534 |
| 7.50*16 | 8 | 750 |
| 8.18 | 6 | 800 |
| Tyre size | Ply rating | Weight capacity (kg) |
|---|---|---|
| 12.4*28 | 12 | 1211 |
| 13.6*28 | 12 | 1329 |
| 14.9*28 | 12 | 1545 |
Ballasting
Weight rings of 48 kg are available for tractor which should be used for ballasting to avoid wheel slippage. While mounting weights on tractor’s wheels it is very important to tight the weight bolts with specific torque and better understand about it here is a table:
| Parts | Torque amount |
|---|---|
| Front disc to hub | 210 Nm |
| Rear disc with rim | 245 Nm |
| Rear disc with hub bolts | 550 Nm |
| Bolts for ROPS adjusment | 420 +- 10 Nm |
| Rear weight with disc | 230 Nm |
Water ballasting is also good option to avoid wheel slippage but before doing this there are some points which should be noticed:
- Fill 75% water and 25% air in rear tyre.
- In case of extreme cold conditions (i.e. temperature less than 0°C) 600 gram of Calcium chloride should be mixed with 1 litre of water to avoid freezing of water and damage to tyres.
To get good performance from tractor it is very important to select the right implement for tractor. Here is a implement chart to deeply understand about it:
Implement selection
| Implement | Type |
|---|---|
| MB plough | 2 bottom |
| Reversible MB plough | 1 & 2 bottoms |
| Disc plough | 2 disc |
| Offset Disc harrow | 12 and 14 discs |
| Trailed disc harrow | 12 to 14 discs |
| Cultivator (rigid spring) | 7 to 11 tines |
| Rotavator | 1.25 to 1.50 metre |
NOTE: Type of implement will change according to soil condition especially in case of rotavator.
To maintain tractor properly here is maintenance chart in all items of periodic schedule are shown and some other are shown below that but there are some items which may be replaced before the given time period such as air cleaner element because it depends on environment conditions and fan belt etc.
Periodic Maintenance Chart
| Jobs | ||||
|---|---|---|---|---|
| 250 | 500 | 600 | 1250 | |
| Change engine oil & oil filters | ✓ | |||
| Service of air cleaner | ✓ | |||
| Change fuel filters | ✓ | |||
| Check condition of fan belt | ✓ | |||
| Lubrication of 3 points hitch | ✓ | |||
| Check neutral start switch system | ✓ | |||
| Change transmission-hydraulic filter | ✓ | |||
| Lubrication of rockshaft control support lever | ✓ | |||
| Change oil MFWD axle | ✓ | |||
| Clean engine crankcase tube | ✓ | |||
| Check & tight hoses and hoses clips | ✓ | |||
| Lubricate rear axle bearings | ✓ | |||
| Check engine idle speed | ✓ | |||
| Check front axle pivot pins | ✓ | |||
| Tight front turning bolts | ✓ | |||
| Check water separator tap | ✓ | |||
| Change trasmission oil & oil fiter | ✓ | |||
| Clean transmission, hydraulic pickup screen | ✓ | |||
| Change air cleaner element | ||||
| Flushing of coolant | ||||
Flush cooling system after 2 years and water separator if its walls are blur.
More models:
Eicher 241 full technical specifications & gear speeds
New Holland 5620 CRDI TX plus full specifications & price